There were no noticeable differences between each of these frames. Using the WobbleMeter ( what is the WobbleMeter?), we were able to verify these findings. With natural variances existing within the steel tubing used on the desks, the stability between two frames can vary slightly. It is not the same product as the standard v2 we are reviewing today and the stability for each is quite a bit different.īecause there were no real changes to the v1 and v2 frames, the stability of the products remained virtually the same. Overall, the commercial design was built to improve stability and it did. This commercial frame also includes larger tubes, that are made from a thicker steel. The v2 commercial product now includes the use of a traditional cross support between the legs. 15 mm we’ve seen from this product in the past.Īdditional confusion likely exists because of the release of the v2 commercial product. The tolerances are still within the same. Based on our own testing of four different Uplift v1 and v2 frames, there hasn’t been an improvement of tolerances between the tubing. A lot of this stems from claims from Uplift Desk that they’ve improved the stability of the v2 with the tightening of tolerances between the columns (metal legs). One of the things that we’ve been getting asked a lot, since the release of the Uplift v2, is how the stability compares to the v1. See The Best Electric Standing Desks For 2022Īfter months of testing 20+ adjustable height desks, the results are in! The 30-90 minutes of assembly time does not include this portion of the setup. If you have a bit set, I would recommend using a cordless drill to speed the process up significantly.ĭepending on the amount of wires you have with your desk, the wire management process could take longer than the actual frame and top assembly. Using the allen wrench, included, can be time consuming with the quantity of bolts required to complete the assembly of the frame. The same pain point exists with some of the hardware being difficult to insert and tighten. The actual assembly process hasn’t changed between the two versions over the past two years. This includes the Uplift v1 that we assembled back in 2017. The assembly of the Uplift v2 is on par with other JieCang frames we’ve assembled. This has reduced the weight of the large box and made it a bit easier to handle. Instead of including all components for the frame in one box, the have split it into two boxes now. The packaging for the Uplift v2 has changed some compared to the Uplift v1. 7 year warranty on all parts including electronics.6-way accelerometer collision avoidance system.48 mounting hole system in under desk cross support.Telescoping base to adjust to multiple width tops.Two stage legs (three piece) for 26” overall adjustment range.Below is a general breakdown of prices for various sizes of bamboo and laminate desks. Product Specs (per )Īdjustable Foot Glides: 3/8” Adjustment 2022 PricingĪs I was finishing this review, the prices on the Uplift v2 desk changed. They have also updated their foot design, to include an aluminum foot. has made multiple changes to the product, including a switch from the T-base to the C-base now being used. The original version of the desk was the Uplift 900. The Uplift desk brand was introduced in 2013. They are one of the leading Chinese manufacturers of electric standing desks. In 2011 they saw an opportunity to produce adjustable bases, using their linear actuator technology within metal desk frames. They have been producing linear actuators for hospital beds and accessories since early 2000. This is the same manufacturer used for the Uplift v1 standing desk. The Uplift v2 is currently manufactured by a popular Chinese company, JieCang Linear Motion.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |